Sunway Winstar. Abrasive tools

Picture of (U) ABRASIVE PAPER CLOTH 2# ALUM OXIDE 9X11IN 100/500CTN

(REMOVE) ABRASIVE PAPER CLOTH ALUM OXIDE 9X11IN 2#

Picture of (U) NIETZ SOBAR CUP BRUSH (CARBON STEEL) 3IN M10X1.25 10

(REMOVE) NIETZ SOBAR CUP BRUSH (CARBON STEEL) 3IN M10X1.25

Picture of (U) NIETZ SOBAR POINTED CARBON STEEL END BRUSH 25MM 200/CR

(TS) NIETZ SOBAR POINTED CARBON STEEL END BRUSH 1INX25MM

Picture of 3IN M10X1.5 100% PURE BRASS NON SPARK CUP BRUSH 60/CTN

NIETZ 100% PURE BRASS NON SPARK CUP BRUSH 3IN M10X1.5

Picture of 3IN M10X1.5 PURE BRASS WIRE CUP BRUSH 100/CTN

NIETZ PURE BRASS WIRE CUP BRUSH 3IN M10X1.5

Picture of NIETZ 2 SPEED MAGNETIC DRILL MACHINE 561-95-502

NIETZ 2 SPEED MAGNETIC DRILL MACHINE SMD502

The 2-speed gearbox allows a wide rangeof cutters to be used and deliversmaximum torque. The Quick-Release arbor makes it quickand tool free to change cutters andaccessories. Slide Height LockThe Quick-adjustable variableheight slide allows a variety oftools to be used. Lower forcutters, raise for twist drills. TWIST DRILLINGA revolution in time savings, thenew special weldon shank drillchuck mounts directly into thequick release arbor. This means itnow takes just seconds to convertfrom cutter to twist drills!

Picture of NIETZ 4 FLUTE SOLID CARBIDE END MILL 10MM

NIETZ HRC 45D SOLID CARBIDE TUNGSTEN STEEL 4 FLUTE SQUARE END MILLS 10MM

Picture of NIETZ 4 FLUTE SOLID CARBIDE END MILL 12MM

NIETZ HRC 45D SOLID CARBIDE TUNGSTEN STEEL 4 FLUTE SQUARE END MILLS 12MM

Picture of NIETZ 4 FLUTE SOLID CARBIDE END MILL 16MM

NIETZ HRC 45D SOLID CARBIDE TUNGSTEN STEEL 4 FLUTE SQUARE END MILLS 16MM

Picture of NIETZ 4 FLUTE SOLID CARBIDE END MILL 3MM

NIETZ HRC 45D SOLID CARBIDE TUNGSTEN STEEL 4 FLUTE SQUARE END MILLS 3MM

Picture of NIETZ 4 FLUTE SOLID CARBIDE END MILL 4MM

NIETZ HRC 45D SOLID CARBIDE TUNGSTEN STEEL 4 FLUTE SQUARE END MILLS 4MM

Picture of NIETZ 4 FLUTE SOLID CARBIDE END MILL 5MM

NIETZ HRC 45D SOLID CARBIDE TUNGSTEN STEEL 4 FLUTE SQUARE END MILLS 5MM

Picture of NIETZ 4 FLUTE SOLID CARBIDE END MILL 6MM

NIETZ HRC 45D SOLID CARBIDE TUNGSTEN STEEL 4 FLUTE SQUARE END MILLS 6MM

Picture of NIETZ 4 FLUTE SOLID CARBIDE END MILL 8MM

NIETZ HRC 45D SOLID CARBIDE TUNGSTEN STEEL 4 FLUTE SQUARE END MILLS 8MM

Picture of NIETZ 6MM CROSS CARBIDE TIP DRILL BIT 10/1000

NIETZ CROSS CARBIDE TIP DRILL BIT 6MM

Picture of NIETZ 8MM CROSS CARBIDE TIP DRILL BIT 5/500

NIETZ CROSS CARBIDE TIP DRILL BIT 8MM

Picture of NIETZ BSP THREAD HIGH SPEED STL MACHINE/HAND TAP 1/4INX19

NIETZ BSP THREAD M2 HIGH SPEED STEEL MACHINE/HAND TAP 1/4IN X 19

* British Standard Straight Pipe Taps* ??SKC 089-07-XXX* Use For : Casting Iron, Bronze, Low / Medium Carbon Steel, Mold Steel, Tool Steel,Aluminium / Magnesium Alloy Steel

Picture of NIETZ BSP THREAD HIGH SPEED STL MACHINE/HAND TAP 1/8INX28

NIETZ BSP THREAD M2 HIGH SPEED STEEL MACHINE/HAND TAP 1/4IN X 28

* British Standard Straight Pipe Taps* ??SKC 089-07-XXX* Use For : Casting Iron, Bronze, Low / Medium Carbon Steel, Mold Steel, Tool Steel,Aluminium / Magnesium Alloy Steel

Picture of NIETZ BSP THREAD HIGH SPEED STL MACHINE/HAND TAP 3/8INX19

NIETZ BSP THREAD M2 HIGH SPEED STEEL MACHINE/HAND TAP 3/8IN X 19

* British Standard Straight Pipe Taps* ??SKC 089-07-XXX* Use For : Casting Iron, Bronze, Low / Medium Carbon Steel, Mold Steel, Tool Steel,Aluminium / Magnesium Alloy Steel